How do you make a Teething ring yourself? Pentagon variant!
Amber Winsveen
Jootjes Silicone Beads
Introduction
At Jootjes Haakcadeautjes you’re in the right place to make your own baby teething toys. The guide below provides the instructions you need to create your own teether. It is a very simple teether, but you can of course customize it in many ways. Browse our webshop or our blog, or follow us onFacebook, Instagram of Pinterestfor much more inspiration. You will find many examples of teething rings, inspiration regarding other types of baby chew toys and colour combinations.
Short disclaimer: We are a supplier for Silicone beads and DIY materials.As a wholesaler of baby teething toy materials, we also provide all the supplies you need to make this teething ring via our webshop. All our materials are completely baby‑safe, 100 % free of toxic substances and fully compliant with European regulations. We have been the market leader in baby teething toy materials for a long time.We created this Pentagon Teething Ring to inspire you. The teething ring shown here as a specific example has not been tested or certified as a final product.❤️ Make and use at your own risk. If you are going to make this creation and want to sell it, you must have it tested and certified❤️
Supplies:
- 5 x 20 mm Beads
- 10 x Pumpkin Bead 8 x 20.5 mm
- 5x safety beads 16 mm for the corner points.
- 1.5 Count Satin cord.
All above materials Are available on Our webshop!
Elaboration Instructions:
This teething ring is strung differently than other teething rings. Because we wanted to keep this tutorial a bit shorter and focus more on this specific shape. If you are not yet familiar with the basics of making a teething ring, we recommend that you first read the basic tutorial here –> Basic tutorial. For creating the pentagon shape we used safety beads at the corners. This is different from the standard. You go through one hole and back through the other.
You first ride all the way up until you are Round. Then you calmly start shifting This Beads.At first, don’t pull too hard; instead, gently slide the beads toward each other, segment by segment of the pentagon, using a little pulling, pushing and sliding. Because of the way the safety beads are positioned, they will provide some resistance, so they won’t slide easily. If you pull harder, you tighten the safety bead, which will only increase the resistance.
If you have pushed all the beads a little close together, then only then do you tie two knots right away. At that moment you can pull the teething ring nice and tight.After that, you will thread back in two directions. Once you reach a safety cage, work from the inside. Do not insert into the first hole, but into the farthest hole from where you are working. Then insert back from above through the nearest hole and continue to the next side. Keep your cord tight as you work.
Once you have reassembled it, tie another double knot. By threading two additional beads to the side with both threads, you can pull the knot out. Cut off the ends! Congratulations, you have made a Beautiful Pentagon teething ring!
Love,
Team Jootjes
All above materials Are available on Our webshop!
DISCLAIMER: In this guide, the teething ring is made from satin cord and is therefore very durable. Satin cord is very sturdy due to the way it is produced (weaving/textile processing) and provides a lot of grip/friction on the knots. These knots therefore do not come loose easily when tightened tightly. However, wear is always possible with any product you use; that is simply a fact.
Jootjes Haakcadeautjes does not produce the teething ring itself and can never be held liable for potential damage caused by loose teething rings. We present a method for making the teething rings that, in our view, is a very reliable method. Production and use of a teething ring, however, is always at your own responsibility. Jootjes Haakcadeautjes can never be held responsible for damage resulting from the use of a teething ring produced based on this manual. In any case, our advice is strict. Always use teething toys only under the supervision of a responsible adult!
COPYRIGHT: Jootjes Haakcadeautjes, all patterns and instructions from Jootjes Haakcadeautjes may only be released by Jootjes Haakcadeautjes. The patterns and instructions are for personal use and may not be used for commercial purposes. This guide may not be translated or published on your own site, but sharing a link to the guide is of course allowed provided it includes source attribution and a correct reference!
If you have questions about this blog or about our products, send us an email, contact us via WhatsApp, call us or send us a message on social media. You can also click below to see our contact details:
One thought on “How do you make a Teething ring yourself? Pentagon variant!”
These teething rings look Beautiful! They can be perfect as a gift for a newborn; for example, you can add a wool blanket to them and the gift is ready! 🙂